|
|
M.3-16mm Special
(INC47/B-SCM)
Perforates and cuts the adhesive tape to join 16
mm film.
-
Micrometrical registration pins regulator to obtain
always perfect butt splices also with old and retired film.
-
Retractable pins for splicing of non-standard
pitched film.
-
Film-hold-down-springs for curled film.
-
Guide lines for tape application.
-
Spring-loaded knife, always ready for the next cut.
-
Anti-skid plate with rubber foot mounting to keep
the splicer stationary and to collect the punched-out tape rectangles.
- For a better result in time we recommend to use a proper splicing
tape like our CIR (NAS2 15mmx10mt Tape Clear Edit)
|
|
|
Available with additional diagonal cutter for magnetic
tape:
(M.3-16mm 2T Special (INC47/A-SCM )
For a better result in time we recommend to use a proper splicing tape
like our CIR (NAS2 15mmx10mt Tape Clear Edit)
|
|
|
M.3-16mm 2T Double Perf.Special
(INC48)
Perforates and cuts the adhesive tape to join 16 mm
film and magnetic tape with double perforations.
-
Micrometrical registration pins regulator to obtain
always perfect butt splices also with old and retired film.
-
Alternating pins for single frame magnetic tape cut
and retractable pins for splicing of non-standard film.
-
Film-hold-down-springs for curled film.
-
Guide lines for tape application.
-
Spring-loaded knives, always ready for the next cut.
-
Anti-skid plate with rubber foot mounting to keep the
splicer stationary and to collect the punched-out tape rectangles.
-
For a better result in time we recommend to use a
proper splicing tape like our CIR (NAS2 15mmx10mt Tape Clear Edit)
|
|
|
M.3-17,5mm (INC15)
Perforates and cuts the adhesive tape
to join 17,5 mm magnetic tape.
-
Auxiliary guide channel to allow the cut of even 1
only perforation from the end of magnetic tape during editing and
synchronizing operations.
-
Magnetic tape diagonal cutter.
-
For a better result in time we recommend to use a
proper splicing tape like our (CIR (NAS2 15mmx10mt Tape Clear Edit)
|
|
|
M.3-35 mm Special (INC51/B-SCM)
Perforates and cuts the adhesive tape to join 35mm
film.
-
Micrometrical registration pins regulator to obtain
always perfect butt splices also with old and retired film.
-
Spring-loaded knife, always ready for the next cut.
-
Anti-skid plate with rubber foot mounting to keep
the splicer stationary and to collect the punched-out tape rectangles.
- For a better result in time we recommend to use a proper splicing
tape like our CIR
(NAS8 25mmx10mt Tape Clear
Edit).
|
|
|
Available with additional diagonal cutter for magnetic
tape:
(M.3-35mm 2T Special (INC51/A-SCM)
For a better result in time we recommend to use a proper
splicing tape like our CIR (NAS8 25mmx10mt Tape
Clear Edit).
|
|
|
M.3-35mm Pos/2Frames Special
(INC44/b)
Perforates and cuts a special 38mm
wide adhesive tape which covers exactly 2 frames of 35 mm film with
positive perforation.
-
Micrometrical registration pins regulator to obtain
always perfect butt splices also with old and retired film.
-
Spring-loaded knife, always ready for the next cut.
-
Anti-skid plate with rubber foot mounting to keep
the splicer stationary and to collect the punched-out tape rectangles.
- For a better result in time we recommend to use a proper splicing
tape like our CIR (NAS9B 38mmx10mt Tape Clear Edit).
|
|
|
M.3-35mm Cinemascope Special
(INC19)
Perforates and cuts the adhesive tape
to join 35 mm film with cinemascope perforation.
-
Micrometrical registration pins regulator to obtain
always perfect butt splices also with old and retired film.
-
Spring-loaded knife, always ready for the next cut.
-
Anti-skid plate with rubber foot mounting to keep
the splicer stationary and to collect the punched-out tape rectangles.
- For a better result in time we recommend to use a proper splicing
tape like our CIR (NAS8 25mmx10mt Tape Clear Edit).
|
|
|
M.3-70mm Special (INC20)
Perforates and cuts the adhesive tape to join 70mm
“cinema” film with 4 sound tracks.
|
|
