Splicer for Archive/Video-Transfert/Special Formats

 

M.3-35mm Pos/2Frames Special (INC44/b)

Perforates and cuts a special 38mm wide adhesive tape which covers exactly 2 frames of 35 mm film with positive perforation.

  • Micrometrical registration pins regulator to obtain always perfect butt splices also with old and retired film.

  • Spring-loaded knife, always ready for the next cut.

  • Anti-skid plate with rubber foot mounting to keep the splicer stationary and to collect the punched-out tape rectangles.

  • For a better result in time we recommend to use a proper splicing tape like our CIR (NAS9B 38mmx10mt Tape Clear Edit).

 

M.3-16mm Special (INC47/B-SCM)

Perforates and cuts the adhesive tape to join 16 mm film.

  • Micrometrical registration pins regulator to obtain always perfect butt splices also with old and retired film.

  • Retractable pins for splicing of non-standard pitched film.

  • Film-hold-down-springs for curled film.

  • Guide lines for tape application.

  • Spring-loaded knife, always ready for the next cut.

  • Anti-skid plate with rubber foot mounting to keep the splicer stationary and to collect the punched-out tape rectangles.

  • For a better result in time we recommend to use a proper splicing tape like our CIR (NAS2 15mmx10mt Tape Clear Edit)

 

M3-35mm Archiver (INC56)

Especially designed for splice-reinforcements and short perforation repairs on old 35mm archive film (negative/positive).

  • Re-make dried-out, damaged or half detached splices due to ageing, which would not pass through re-printing or telecine.

  • To reinforce or repair damaged perforations due to ageing, which could not be repaired with the normal pre perforated adhesive tape without alterning the film pitch.

  • Always performing perfectly butt well-aligned splices, even when film is remarkably shrunk.

  • For better results in time we recommend to use a proper splicing tape like our CIR (NAS12A SPC 25mmx20mt Tape Black/Pre or NAS9B 38mmx10mt Tape Clear Edit)
    •

A sample of splice reinforcement and perforation repair.

8-S8-9,5mm

16mm

  

 

MAC2-35mm Cement Negative (CINE 1)

Especially designed for splicing all types of 35 negative film and reparing any splice, even on very old library shots. It resolves the film pitch and/or width variation problems, also arising with ageing acetate or nitrate film. Thanks to a series of well-engineered matrix regulations it works perfectly with in-pitch and well aligned splices and also enables you to remake defective splices before printing, thus eliminating possible transport problems. The automatic spiral miller accurately scrapes the film emulsion and simultaneously vacuums the entire resulting residue eliminating any ”rain” effect  on  the film.

Brand new film milling sliding support for an easiest and more precise scraping procedure.

 

  • · Exact in-pitch perforation.

  • · Carefully aligned film edges.

  • · Neat frame and  frame line.

  • · Working area perfectly clean with no risk of “rain” effect on film.

  • · Remaking of defective splices on very old film with shrunk width and length.

AVAILABLE FOR 16mm, 9,5mm, 8mm, Super8 (ONLY ON REQUEST)

M.3-35mm Neg./2FramesSpecial (INC44/a)

Perforates and cuts a special 38mm wide adhesive tape which covers exactly 2 frames of 35 mm film with negative perforation.

  • Micrometrical registration pins regulator to obtain always perfect butt splices also with old and retired film.

  • Spring-loaded knife, always ready for the next cut.

  • Anti-skid plate with rubber foot mounting to keep the splicer stationary and to collect the punched-out tape rectangles.

  • For a better result in time we recommend to use a proper splicing tape like our CIR (NAS9B 38mmx10mt Tape Clear Edit).

 

9,5mm Pathè (INC2)

Perforates and cuts the adhesive tape to join 9,5 Pathe’ film in one single action with a wraparound splice.

  • Completes range of CIR splicers for all amateur film formats (8, Super 8, 16 and 9,5).

  • Metal casting with cutting parts in stainless anti-magnetic steel.

  • Possibility to splice old and retired film.

  • Particularly indicated for film archives to reinforce or remake splices on old film without loosing a single frame.

  • For a better result in time we recommend to use a proper splicing tape like our CIR (NAS11 13,8mmx10mt Tape Clear Edit)

 

8mm (INC1)

Perforates and cuts the adhesive tape to join 8mm film in one single action with a wraparound splice, leaving the sound track free.

  • Completes range of CIR splicers for all amateur film formats (8, Super 8, 16 and 9,5).

  • Metal casting with cutting parts in stainless anti-magnetic steel.

  • Possibility to splice old and retired film.

  • Particularly indicated for film archives to reinforce or remake splices on old film without loosing a single frame.

  • For a better result in time we recommend to use a proper splicing tape like our CIR (NAS13 12mmx10mt Tape Clear Edit)

 

Super 8 (INC3)

Perforates and cuts the adhesive tape to join super 8mm film in one single action with a wraparound splice.

  • Completes range of CIR splicers for all amateur film formats (8, Super 8, 16 and 9,5).

  • Plastic base with cutting parts in stainless anti-magnetic steel.

  • Possibility to splice old and retired film.

  • Particularly indicated for film archives to reinforce or remake splices on old film without loosing a single frame.

  • For a better result in time we recommend to use a proper splicing tape like our CIR (NAS10 8,5mmx10mt Tape Clear Edit)

 
   
 

Home   Products